The EPEVER Tracer AN Series Solar Demand Controller is actually a really successful solar controller made for off-grid photo voltaic systems. Based on multiphase synchronous rectification know-how, it ensures optimized Power conversion and program balance for a variety of photovoltaic (PV) apps.
Essential Functions on the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Cost Controller know-how for top-quality photo voltaic Electrical power harvesting. Key features include:
Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
Advanced MPPT Algorithm with >99% effectiveness.
Twin-Stage Charging for enhanced battery life.
LCD Display with real-time details checking.
Various Load Regulate Modes which include handbook and timer.
Thorough Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Stage Guidebook to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer manual.
Verify the product range and voltage rankings match your solar panel and battery specifications.
two. Mounting the Cost Controller
Pick a effectively-ventilated, dry place near the battery lender.
Protected the Tracer AN controller utilizing the delivered mounting brackets.
Retain suitable clearance for heat dissipation.
three. Wiring the Photo voltaic Charge Controller
Caution: Always abide by right security protocols and ensure the procedure is driven off just before connecting components.
Move one: Link the battery terminals to the demand controller (constructive to good, negative to detrimental).
Phase 2: Hook up the photo voltaic panel array to your PV input terminals.
Step three: Link the load terminals if employing a immediate load relationship.
Step four: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Settings
Electric power around the controller by connecting the battery initial.
Utilize the LCD Show to navigate the options menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, light-weight Regulate.
5. Checking and Knowledge Logging
The Tracer AN Series supports authentic-time monitoring utilizing the Read more MT50 distant meter.
Info can be logged by means of the RS485 communication port working with application such as Photo voltaic Station Computer.
Distant monitoring can be done With all the EPEVER WiFi module.
6. Troubleshooting Frequent Issues
Challenge one: No Power Output
Examine battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Issue two: Around-Voltage Safety
Confirm the photo voltaic array’s voltage rating.
Change method parameters if required.
Situation 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings inside the menu.
Benefits of the Tracer AN Collection with MSR Know-how
The multiphase synchronous rectification engineering makes sure:
Increased Performance: Decreased Electricity losses in the course of conversion.
Increased Reliability: Steady general performance beneath variable hundreds.
Lengthier Battery Lifetime: Regular and exact charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation can be an exceptional choice for optimizing solar energy era and increasing battery existence. By pursuing the above setup information, buyers can make certain utmost performance and method longevity.